Simple stretch ceilings

Simple ceilings – ceilings are executed in the same level plane and with the number of angles up to 10 for one product.

Such ceilings are the simplest and most often ordered on the territory of Canada.
The cost of simple stretch ceilings is not high.
Full-time installation varies around a few hours, which makes repairing the ceiling a simple task.

Ceiling price,
$/ft2*

6

Category of
complexity

Measurement

Manufacture

Installation

Form

Simple geometry

Duration of
installation, h.

2-4 hour

Order
frequency, %

53 %

Complex stretch ceilings

Complex stretch ceilings – is the ceilings, filled with one level and a plane, but with complex geometry, curved, or with a lot of corners.

Such ceilings are more complex and require more data when measuring, as well as more complex in cutting and installation.
The cost is slightly higher than the simple stretch ceilings and is calculated from the data on the additional elements. The calculation takes into account the number of corners, the length of the curved section, the difficulty of installing very sharp corners (less than 45 degrees), etc.

Ceiling price,
$/ft2*

12-23

Category of
complexity

Measurement

Manufacture

Installation

Form

Complex geometry

Duration of
installation, h.

4-8 hour

Order
frequency, %

7 %

Photo printing

Photo printing – is ceilings, filled with potting printing partially or over the entire surface of the PVC film.

Photo printing is performed on pvc film with special equipment in an eco-salven way and can be placed both on the entire surface and only on part of the product.
Photo print can be selected independently by the customer.
The cost of such stretch ceilings is quite high. It is based on the high cost of printing itself and the complexity of cutting and installation.

Ceiling price,
$/ft2*

11

Category of
complexity

Measurement

Manufacture

Installation

Form

Complex geometry

Duration of
installation, h.

4-6 hour

Order
frequency, %

5 %

Volumetric stretch ceilings

Volumetric – it stretch ceilings, made in one level, but not in the same plane.

Ceilings in the form of arches, domes, waves, dunes or other elements curved in the plane.
The cost of such ceilings is higher than simple stretch ceilings and is formed due to the difficulty of measurement and installation, since the cutting of such ceilings is not too complicated.

Ceiling price,
$/ft2*

15-25

Category of
complexity

Measurement

Manufacture

Installation

Form

Complex geometry

Duration of
installation, h.

6-12 hour

Order
frequency, %

2 %

Translucent

Translucent – stretch ceilings, made of translucent PVC film.

They are used only in combination with various hidden lights, which are mounted in the interceiling space and form light from inside the stretch ceiling.
Can be used with photo printing.

Ceiling price,
$/ft2*

28

Category of
complexity

Measurement

Manufacture

Installation

Form

Simple geometry

Duration of
installation, h.

8-15 hour

Order
frequency, %

4 %

Combination

The combination is the stretch ceilings, made of a combination of several colors or textures from 2 to 5 in one stretch ceiling.

Such ceilings have become popular in recent years, because there are quite inexpensive, but look original and fresh.
The complexity of measurement and installation is higher than that of simple stretch ceilings, however, the cutting is not too complicated and the cost of materials is almost unchanged, therefore the final cost is slightly higher.

Ceiling price,
$/ft2*

10-18

Category of
complexity

Measurement

Manufacture

Installation

Form

Simple geometry

Duration of
installation, h.

4-5 hour

Order
frequency, %

5 %

Curved seam

Curved seam – stretch ceilings, made from a combination of several colors / textures with the curved seam when splicing.

This kind of combination, however, looks different and is more difficult to manufacture.
Such stretch ceilings are usually combined from contrasting colors or different textures, at the same time, the seam goes along a predetermined path with smooth lines.

Ceiling price,
$/ft2*

19

Category of
complexity

Measurement

Manufacture

Installation

Form

Simple geometry

Duration of
installation, h.

4-5 hour

Order
frequency, %

8 %

Stensils

Stensils – stretch ceilings made in two levels one above the other throughout the area of the room. The bottom of which has a different diameter holes in accordance with a predetermined pattern.

In such stretch ceilings most often use the lower level of white pvc film, and the top, which peeps through the holes, is made of bright saturated colors.
The cost of such stretch ceilings is quite high, as it takes into account the double use of PVC film, high complexity of cutting and longer installation.

Ceiling price,
$/ft2*

15

Category of
complexity

Measurement

Manufacture

Installation

Form

Simple geometry

Duration of
installation, h.

6-8 hour

Order
frequency, %

2 %

Soaring

Soaring – stretch ceilings, made in one level using special technological profiles with the possibility of fixation along the perimeter of the diode backlight.

Diode lights, in this case, shine into the end of the stretch ceiling, which allows you to create a soaring effect and visually lift the arch.
Installation and measurement is not very different from the installation of the usual simple stretch ceiling, only the installation of a diode lights along the perimeter is added.

Ceiling price,
$/ft2*

11

Category of
complexity

Measurement

Manufacture

Installation

Form

Simple geometry

Duration of
installation, h.

6-8 hour

Order
frequency, %

3 %

Starry sky

Starry sky – stretch ceilings, made in the same level, with a simple or complex geometry and with a distributed diode point lights.

In the interceiling space, a generator block and a bundle of optical fibers are installed, which pierce the tensioning sheet and are fixed in it.
At the end of the fiber glows and creates the effect of a twinkling star.

Ceiling price,
$/ft2*

17

Category of
complexity

Measurement

Manufacture

Installation

Form

Simple geometry

Duration of
installation, h.

8-15 hour

Order
frequency, %

4 %

Multi-level ceilings

Multi-level – this stretch ceilings, made in two or more levels.

They can be with simple or complex geometry, different level transitions, etc. Such ceilings are quite complex in all aspects. They are difficult to measure and install.
The cost of suspended multi-level ceilings is quite high, but they look impressive and volume.
The number of transition levels is limited only by the presence of free height and can reach 5 or more levels.

Ceiling price,
$/ft2*

14-22

Category of
complexity

Measurement

Manufacture

Installation

Form

Complex geometry

Duration of
installation, h.

8-15 hour

Order
frequency, %

6 %

Our Catalog

Download PDF file

Support